Floor Sealer Finish is a high-performance, fast-curing floor finish for use on all internal resilient floors such as vinyl and porous composite tiles.
It delivers diamond-like brilliance and clarity across a wide variety of surfaces and resists scuffing, dirt and marking.
It can be used as a scrub and recoat finish responding well to spray buffing, which means the floor will retain its gloss for longer between recoats.
It is designed for low-speed applications.
IMPORTANT: As we have no control over where this product is used, where it is applied or how it wilI react, no warranty is expressed or implied as to the results obtained. The seller, distributor or manufacturer shall not be liable for any injury direct or consequential, arising out or how the product is used.
We have a team of friendly and knowledgeable experts who are trained to answer all your questions as quick as possible. So if there is anything you need to know, we are just a call away.
You can contact us during our business hours or send us an email at anytime.
0800 115 299
sales@chemicorp.co.nz
Application:
With a flat synthetic lint-free finish mop applicator, apply a light, even coat of High Gloss Floor Sealer, ensuring even application.
Slightly overlap to join coats when finishing large flooring areas whilst the coating is still wet to ensure a uniform appearance.
Allow the first coat to dry thoroughly, usually around 20-30 minutes between coats.
Apply two more coats until the floor has been finished with a maximum of three coats.
Coverage:
Approx 300m2 per 5L, depending on the absorbency of the surface.
The product comes ready to use.
Drying Times: Touch dry and recoat in 30 minutes. Suitable for light foot traffic within 4 hours. Normal foot traffic and normal wear within 8 hours.
Full curing hardness is achieved within 6-7 days.
Maintenance: Maintain the sealed floor by damp mopping or light machine scrub using our Neutral Floor Cleaner. The floor can be burnished once dry if a high gloss appearance is desired. Periodically deep scrub clean with our Floor Maintainer.
Note: Not for use on flexible surfaces like safety floors, Altro floors etc.
We have a team of friendly and knowledgeable experts who are trained to answer all your questions as quick as possible. So if there is anything you need to know, we are just a call away.
You can contact us during our business hours or send us an email at anytime.
0800 115 299
sales@chemicorp.co.nz
You can expect orders to be fulfilled within 1 to 3 business days.
If you need this urgently, please contact us at sales@chemicorp.co.nz.
Get in contact with us at sales@chemicorp.co.nz and we can arrange shipping internationally.
Simply just give us at call or email us at sales@chemicorp.co.nz. Or alternatively you can drop off the product at the warehouse with your invoice/receipt.
Please read the return policy to ensure the return is eligible.
We have a team of friendly and knowledgeable experts who are trained to answer all your questions as quick as possible. So if there is anything you need to know, we are just a call away.
You can contact us during our business hours or send us an email at anytime.
0800 115 299
sales@chemicorp.co.nz
May be fatal if swallowed and enters airways
Causes mild skin irritation
Toxic to aquatic life with long lasting effect
Read label before use. Keep container tightly closed when not in use. Avoid inhaling vapour, use only with adequate ventilation.
Wear rubber gloves and safety glasses when using or handling this product (PPE Gear).
If skin rash or irritation occurs get medical attention. Remove contaminated clothing and rinse skin with plenty of soap and water. If swallowed, immediately call Poisons Centre (0800 POISON) or get medical attention. Do NOT induce vomiting.
If medical advice is needed, have product or label at hand.
In case of fire use CO2 dry chemical or foam extinguisher. Absorb spilled liquid with sand or inert material.
Store locked up, in a well-ventilated place and keep containers cool.
Avoid release to the environment. Do not allow to enter drains or waterways. Dispose of this material and its container to a hazardous or special waste collection point.
Never mix chemicals together.
As we have no control over where this product is used, where it is applied or how it will react, no warranty is expressed or implied as to the results obtained.
The seller, distributor or manufacturer shall not be liable for any injury direct or consequential, arising out or how the product is used.
SDS is available on request.
The information contained in this website is for general information purposes only.
The information is provided by Chemicorp New Zealand and while we endeavour to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose.
Any reliance you place on such information is therefore strictly at your own risk.In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this website.
Through this website you may be able to link to other websites which are not under the control of Chemicorp New Zealand.
We have no control over the nature, content and availability of those sites.
The inclusion of any links does not necessarily imply a recommendation or endorse the views expressed within them.
Every effort is made to keep the website up and running smoothly.
However, Chemicorp New Zealand takes no responsibility for, and will not be liable for, the website being temporarily unavailable due to technical issues beyond our control.
